Stord Manufacturer Hot Selling Ultrasonic Proximity Sensor CE Approval

• Customization: Available
• Type: High Frequency Ultrasonic Sensor
• Output Signal Type: Switch Type
• Model NO.: UB400-12GM-E5-V1
• Sensitivity: High
• Probe Type: Straight Probe
• Measuring Medium: Liquid
• IP Rating: IP55
• Certification: CE
• Customized: Customized
• Output: Switching Sensor
• Usage: Position Sensor
• Theory: Ultrasonic Sensor
• Material: Mixture
• Transport Package: Ultrasonic Sensor Special Box
• Trademark: STORD
• Origin: China
• Production Capacity: 50000

Product Description

 

Technical data

General Specifications

Sensing distance                     30…400mm

Adjustment range                        50…400mm

Unusable area                             0…30mm

Standard target plate                    100mm×100mm

Transducer frequency                   About 310kHz

Response delay                            About 50ms

Indicators/Operating means      

LED blue                                Power on

LED yellow                             indication of the switching state
                                              Flashing:program function object detected

LED red                     permanently red: Error Red,flashing:program function,object not detected

 

Electrical specifications

Operating voltage UB                   10…30VDC,ripple10%ss

No-load supply current                ≤30mA

Input

Input type                   1 TEACH-IN input Operating distance
                            A1:-UB…+1V,operating distanceA2:+6…
                            + UB Input impedance:>4.7KΩ
                           TEACH-IN programmable pulse :≥1S

Output

Output type                        1 switch output E5,PNP NO/NC, programmable

Rated operational current         100mA,short-circuit/overload protected

Default setting                           Switching point A1:70mm Switching point A2: 800mm

Voltage drop                               ≤ 3V

Repeat accuracy                          ≤ 1%

Switching frequency f          ≤ 8 HZ

Range hysteresis H                   1% of the set operating distance

Temperature influence                  ± 1.5% of full-scale value

Ambient conditions

Ambient temperature             -25…70ºC(248...343K)

Storage temperature                     -40…85ºC(233...358K)

Mechanical specifications

Protection grade                          IP67

Connection                              V1 connector(M12×1),4-pin

Material Housing                         brass,nickel-plated

Transducer                   epoxy resin/hollow glass sphere mixture;
                            foam polyurethane,cover PBT

Weight                                      25g

Compliance with standards and di

Standard conformity                      EN 60947-5-2:2007
                                                IEC 60947-5-2:2007

Adjusting the switching points
The ultrasonic sensor features a switch output with two teachable switching points. These are set by applying the supply voltage - UB or + UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s.LEDs indicate whether the sensor has recognised the target during the TEACH-IN procedure. Switching point A1 is taught with - UB,A2 with +UB.  Five different output functions can be set.

 

Window mode, normally-open function.Window mode, normally-closed function.One switching point,normally-open function   One switching point,normally-closed function.Detection of objet presence.

Switching point, Setting distance only after power on. The internal clock can assure can't be changed after 5 mins when power
on. If want to change the switching point, the user can only setting the request distance after power restart.
 

TEACH-IN window mode,normally-open function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Set target to far switching point -TEACH-IN switching point A2 with + UB
TEACH-IN window mode,normally-closed function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Set target to far switching point -TEACH-IN switching point A1 with - UB

 

TEACH-IN switching point, normally-open function -Set target to near switching point -TEACH-IN switching point A2 with + UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB
TEACH-IN switching point, normally-closed function -Set target to near switching point -TEACH-IN switching point A1 with - UB -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A2 with + UB
TEACH-IN detection of objects presence -Cover sensor with hand or remove all objects from sensing range -TEACH-IN switching point A1 with - UB -TEACH-IN switching point A2 with + UB
Default setting of switching point A1=blind range,A2=nominal distance
LED displays
Displays in dependence on operating mode	Red LED	Yellow LED
TEACH-IN switching point Object detected No object detected Object uncertain(TEACH-IN invalid)	off flashes On	flashes off off
Normal operation	off	Switching state
Fault	on	Previous state

 

Installation conditions
If the sensor is installed at the environment temperature fall below 0ºC,It should do well on the protective measures. In case of direct mounting of the sensor in a through hole using the steel nuts, it has to be fixed at the middle of the housing thread.